Professional-Grade Circus Equipment | Ideal for Aerialists & Performers

The message CHINESE Aerial RUBBER POLE SET – сhinese flying pole 3 m / 38 mm grip + POLE BASE appeared first on Profi-Pole. Circus props & Pole Dance Shop.

The Fly Pole is a unique piece of equipment that combines the world of pole dance and aerial training. Mounted to the ceiling, it rotates around a single point, completely changing the movement dynamics and engaging new muscle groups. Perfect for advanced users looking for new challenges and variations of classic figures.

Why You’ll Love the Fly Pole

• Modular design – choose your ideal length
  The Fly Pole is built from 100 cm and 50 cm segments. Depending on your ceiling height, select from 200 cm, 250 cm, or 300 cm setups. Additional extensions can be purchased separately.
• Experience pole dance differently
  The shifted center of gravity turns familiar moves into new challenges. Training takes on a whole new dimension.
• Aerial & Pole Dance in one
  Thanks to a mount with carabiner and swivel, you can easily switch from Fly Pole to aerial hoop in seconds—no need to change the anchor point.
• Quick installation – only 2 minutes
  Install the Fly Pole on a single ceiling point (or even on a tree in your garden). All you need is a hook, swivel, and two carabiners (takes up approx. 30 cm).
• Professional equipment – Made in Poland
  Made from polished stainless steel or powder-coated. Locally produced to meet the demands of advanced users.

Technical Specifications

• Pole diameter: 45 mm
• Length options: 200 cm (2×100), 250 cm (2×100+50), 300 cm (3×100)
• Load capacity: depends on ceiling and mounting
• Material: chrome-coated black steel
• Assembly time: 2 minutes
• Warranty: 12 months
• Returns: returnable
• Skill level: for beginners and professionals

How to Choose the Right Length

Formula: height from floor to ceiling – 45 cm = ideal Fly Pole length

• Carabiners + swivel: approx. 30 cm
• Recommended mat under the pole: approx. 10 cm
• Safe distance from pole tip to the floor: 5 cm

Include your required pole length in the order comment – we will cut it to your specification!

Care & Safety

• Cleaning: use a cloth dampened with a 1:1 mix of alcohol and water
• Avoid: cleaning with water only – this may cause the pole to rust

The message Fly pole 42 mm – up to 3 meters (ncollapsible) appeared first on Profi-Pole. Circus props & Pole Dance Shop.

Pressure-mounted installation without damaging the floor or ceiling.

• Instantly change the swivel/static function with a pin, not a screw

No longer do you have to waste time unscrewing screws to turn a static tube into a rotating one. All you have to do is pull out the pin and it takes a second. In addition, the pin is a magnet that will stick to the base, even if you do not put it in the right places.

• The top bearing twists to the uneven ceiling in both the non-stick and fixed plate.

This pole dance tube does not require you to have a perfectly even ceiling. In case of slight unevenness, the tube will adjust itself to the vertical, because the upper plate has a swinging bearing.

• Ability to adapt the pipe to a low room

You can shorten the pipe yourself. To do this, simply remove the upper threaded sleeve from the pipe, and then adjust the length of the pipe to the height of the room by cutting off the excess. There is also no lower limit to the height from which we make pipes.

• The thickness of the pipe wall adapted to the height of the room

The higher the pipe, the thicker the wall, because long pipes like to bend, so it is important that the pipe by its construction is adapted to the height of the room.

• The lower base, despite the fact that it is not screwed, has the possibility of screwing.

Sometimes conditions require us to screw not only the ceiling mount, but also the floor plate. If during use it turns out that at your place there are no conditions for the tube to stand without screwing (working floor and working ceiling at the same time, often wooden structures), there is an invisible hole in the base for the screw.

Parameters of the one-piece pole dance pole:

• Weight: 10-15 kg, depending on the length of the pole
• Lifting capacity: 150 kg
• Diameter of the rod: 42.4 mm
• Diameter of ceiling plate: 20 cm
• Diameter of floor base: 15 cm
• Installation/disassembly time: 1-2 minutes
• Warranty period: 12 months

Material: polished stainless steel

Cleaning: With a cloth, any alcohol half and half with water. Do not clean with water alone, because after a few months, black streaks will appear on the surface of polished pipes

Spin-Static Mode Change: Using a pin (clearance between the pin and the hole is 0.5 mm)

Return: No return possible – personalized product

One-piece dance pole is subject to height adjustment within +6 cm from the value specified in the order. Permissible measurement error is 10 mm. The base has the ability to be screwed to the floor. Screwing the pole to the ceiling is recommended from a height above 320 cm, while screwing the pole to the ceiling and floor is mandatory from a height of 350 cm.

IMPORTANT: When ordering, specify the exact height from the floor to the ceiling (place of installation). The height should not be measured against the wall, as such a measurement may be incorrect. 

The message Dance pole – 2in1 swivel/static – up to 2.8m (choose 42mm/45mm) NO DAMAGE appeared first on Profi-Pole. Circus props & Pole Dance Shop.

Are you looking for a convenient and safe freestanding pole dance pole for stage use? Our portable pole with a platform is the perfect solution.

• Suitable for Suspended Ceilings

Since the pole doesn’t require permanent ceiling mounting, it can be installed in rooms with any type of ceiling. The only important factor is the height, as we may need to shorten the pole for lower ceilings.

• Quick Mode Change During Performances

You don’t have to choose between a static and spinning pole. You can easily switch between spinning and static mode using a pin. Unlike most poles on the market that require unscrewing, ours can be changed with a single pin pull.

• Wide Platform in Our Stage Pole

The platform, made of non-slip plywood, has a diameter of up to 210 cm, making it suitable for regular and safe home workouts.

• Transportable Pole

The entire pole, along with the platform, fits in the car trunk when folded.

IMPORTANT! Personalized Product

The product is personalized, meaning it’s made to order for the customer. The pole is cut to fit the customer’s room dimensions. If you don’t provide room dimensions, you’ll receive a product with the longest possible pole.

Parameters

SET INCLUDES: 

• the pole consists of two shorter poles, about 150 cm and 130 cm long, diameter 42 mm. If you choose a painted pole then the part above the platform is painted, while the one that goes into the platform is stainless steel
• platform/base – star
• 8 feet with rubber feet for height adjustment
• floor – 8 platforms
• legs with strap
• locking pin and key

DIMENSIONS:

• 2400x900x100mm, 18 kg
• 1070x770x150mm, 18 kg
• 800x240x150mm, 18 kg
• 800x800x100mm, 15 kg
• 800x800x100 mm, 15 kg

 Safety notes

1.  Read the instructions carefully before first use and keep them for future reference.
2. Consider all warnings and precautions including assembly steps. The equipment may only be used for its intended purpose.
3. The equipment may only be assembled and used by an adult. Children should not use the equipment without adult supervision. 
4. The equipment must be checked for damage or wear before each use. 
5. Maximum load weight: 80 kg
6. In order for the feet in the platform to extend and move easily the base should be on the floor (the centre should not hang in the air, the rubber feet must be tightened all the way!).
7. It is forbidden to use the platform if there are cracks, deformations or severe dents on the steel parts.
8. It is forbidden to use the platform if it is not assembled and installed according to the instructions or if there is play in the structure.
9. In order to unfold the platform stably, it is necessary to press all the components together with a strap after assembly and to dismantle all the legs. All legs on the metal feet must be screwed in before assembly. 
10. Do not operate in static mode when the locking pin is crooked
11. It is important to prevent dirt and small objects from getting into the rotating unit and the pole/ platform connection. If this happens, it must be cleaned. The bearing must be maintained and cleaned by yourself 
12. Do not pull the unfolded stage as the legs may break. The unfolded stage must be moved in two people by gripping the bases with the strap 
13. It is forbidden to remove the pole from the platform if the locking pin is not removed. 

Deviations from the norm that can occur in any pole stage:

1. Noise is allowed in the bearings (due to the floor not being perfectly flat).
2. Pole unevenness allowed up to 3 mm per 1 m.
3. Small scratches on the pole and parts are allowed if they are not perceptible to the touch (such scratches appear all over the pole after 2-3 weeks of active training).
4. Slack at the insertion point of the pin to lock the pole into the static is allowed up to 1 mm along the outer diameter of the pole (the smaller the slack the more difficult it is to pull out/insert the locking pin).
5. ATTENTION!!! If the platform is not unfolded according to the instructions, and all parts are not tightened then the pole may lean. Be careful and always check that the platform is securely installed before you start exercising! if the installation and operation rules are not followed, and if the floor is unstable where the pole is installed, the manufacturer is not responsible for any physical or material damage.

Warranty information:

1. The warranty covers manufacturing defects only.
2. The warranty period is calculated from the date of sale and is 6 months.
3. The warranty covers the free repair or replacement of components that prove to be defective due to the manufacturer’s fault.
4. The warranty service is provided upon prior notification of damage.
5. The warranty service is not provided in case of:

– Failure to comply with the rules and conditions of transport, storage and operation of the product

– If there are traces of unqualified repairs or other activities on the product, which led to a loss of the consumer properties of the product.

– If damage by third parties is found.

– Damage caused by the elements, fire or other accidental external factors.

POLE STAGE assembly instructions

1. Determine the location of the platform, lay out the stage base (star) taking into account the distance from walls and other obstacles of approximately 0.7-1 m
2. insert the legs into the arms of the star, with the adjustment feet towards the floor, but do not insert them all the way, so that the triangles of the platform can be put on (fig. 3). Put on all 8 legs. 
3. Remove the 4 screws from the star and pull off the round plate.

4. place the triangles of the platform on the legs, rough side up (groove up) or if you do not have a rough side of the floor then groove the corners up . The triangles of the floor must be placed close together so that the edges lie on the legs of the platform and are adjacent to each other. Push the legs inwards so that the ends of the legs slide onto the plates fig.6   
5. put the round plate back on the star and tighten the four screws without tightening them with the spanner
6. Put the belt on to tighten the whole stage. Place the belt between the screws so that it does not slide down when putting it on. Place the belt around the structure so that the two ends meet. Place one end through the buckle and tighten until the platform is compressed and there is no slack between the plates.
7. loosen the 4 screws in the middle on the plate with moderate force using a four-pronged Allen wrench.  
8. Insert the lower part of the pole into the centre of the platform ( the heavier part) remove the screws from the coupling and insert the coupling into the lower part of the pole. Screw in the two lower screws with your fingers not all the way in, just enough so that the connector does not fall down. We insert the other part of the pole and finger tighten another two screws. Using the allen key, start tightening the screws from top to bottom, i.e. in such a way that you tighten each screw as firmly as possible in turn starting from the top. Do not tighten, for example, one screw to its maximum tightness while the other is still unscrewed. Repeat the tightening process from top to bottom until the coupling is well spread inside the pole and the pole is stable at the joints. Tighten these bolts firmly but evenly on all four bolts- force  5-6 Nm. Over-tightening the final screw will cause the pole to bulge as too much force will be used and the screw will push the pole out the other side

9. adjust the feet for stability of the pole by unscrewing them to approximately 4 cm/4.5 cm

The pole is in static mode when the pin is inserted into the pole. Removing the pole is always done in the rotating mode of the pole. To lock the rotation, align the hole with the groove and insert the locking pin vertically. To change the mode to rotary remove the locking pin.

The installed pole may sway slightly. This is acceptable as the micro-gap is necessary so that the pole can be inserted and removed without too much difficulty. When working with the weight of a person, the pole should rotate smoothly and steadily.

The message Pole Stage – Portable pole with platform appeared first on Profi-Pole. Circus props & Pole Dance Shop.

Affordable Pole Dance Solution

Our chrome-plated UNI POLE offers excellent value for money, making it an ideal choice for those seeking professional-quality equipment at an affordable price. These foldable poles are perfect for intensive training, backed by positive customer reviews. If you’re looking for a reliable and safe pole to support your progress – this one is for you.

Fast Assembly & Disassembly

The pole is easy to take down, especially when using the fixed mount (see the video at the bottom of the page). Despite appearances, the fixed mount actually makes disassembly easier since the ceiling anchor remains in place. We also offer decorative covers to ensure the mount doesn’t draw unwanted attention.

Static & Spinning Modes in One Pole

No need to choose between static or spinning. Simply loosen the screws at the base to switch between rotation and lock. This feature adds great variety to your workouts.

Stable Silicone Mounting – Protects Floors & Ceilings

The ceiling plate and floor base have silicone surfaces, ensuring stable mounting and protecting your surfaces from damage and dirt. The white silicone does not scratch.

Modular Design for Different Room Heights

Moving to a new space? This modular pole consists of sections that can be connected together (from the set or purchased separately) depending on your ceiling height. If the new space has a higher ceiling, simply purchase an extension and screw it in.

Technical Specifications – Foldable UNI POLE for Dance

The message Foldable Pole for Pole Dance – UNI POLE (45 mm, chrome-plated, up to 2.84 m) appeared first on Profi-Pole. Circus props & Pole Dance Shop.

Fast Pole is a pole designed for high spaces, making it ideal for dance schools. Its specialized design ensures safety and comfort during pole dance training.

Thanks to Quick Pole you will diversify your workouts and engage different parts of your body! The Quick Spin function allows you to instantly change the pole from static to rotating – just pull the pin in one motion.

We will adapt the offered pole to your room. You just need to specify the exact height of the room where you intend to install the pole in the message to your order. To correct measurement errors, we leave a reserve of +6 cm of pole adjustment. With the spare you are sure that your pole will fit perfectly in the room.

What do you gain when you buy one-piece Fast Pole:

• The pole is designed for professional dance schools

It is the perfect choice for use in organized classes. You can quickly disassemble the pole to prepare the room for another type of exercise.

• Reinforced walls adapted to the length of the pole

For poles longer than 3.5 m we use reinforced walls. This solution ensures safety and prevents the pole from bending while dancing.

• Instant change of the rotary-static function

Thanks to the use of Quick Spin, you will quickly change the pole from rotary to static with one move, thus saving time during the class.

• Possibility to personalize the color of the pole

On special request, we will powder paint the pole in white or black, so you can match its appearance to your liking. Painting of the pole is done at an additional charge.

Parameters of one-piece QUICK POLE:

• Weight: 10-15 kg depending on height
• Load Capacity: 150 kg
• Pole Diameter: 42 mm
• Ceiling Mount Diameter: 8.5 cm
• Floor Base Diameter: 10 cm
• Assembly/Disassembly Time: 60 seconds
• Warranty Period: 12 months
• Spin-Static Mode Change: Using a pin (clearance between the pin and the hole is 0.5 mm)
• Material: Polished stainless steel or powder-coated steel
• Cleaning- With a cloth, any alcohol half and half with water. Do not clean with water alone, because after a few months, black streaks will appear on the surface of polished poles

IMPORTANT: When ordering, specify the exact height from floor to ceiling (mounting location). The height should not be measured against the wall, as such a measurement may be incorrect.

The stand in this model of the pole is screwed into the floor. The depth of the hole for the base is a maximum of 3 cm, while the dowels are sufficient for 6 cm. Pins for screwing the fixed mount and for screwing the base should be purchased individually, depending on the mounting surface.

The fixed bracket is a component that is screwed to the ceiling with screws. The tube, on the other hand, can be pulled out of the fixing at any time and set aside. To do this, pull out the pin, loosen the expansion thread and pull the tube out of the fix.

Poles painted in “another color” – You choose the color of the poles from the RAL palette. The presented color chart is for reference only. Not all colors are available. Please inquire to check the availability of a specific color. If you order a minimum of 3 poles in the same color, the price for the poles will be the same as for those painted in black or white.

Are you thinking about making a purchase? Do you have questions? Browse the blog posts or contact us – we will help you choose a product that meets your expectations.

Estimated shipment polished 17 working days, powder painted 20 working days

The message Pole Dance static / spinning pole – QUICK POLE – up 2.85 m appeared first on Profi-Pole. Circus props & Pole Dance Shop.

This professional-grade flying pole is designed for performers, studios, and aerial enthusiasts who want the strength of aerial equipment with the fluidity and freedom of pole movement.

Ideal for both dynamic aerial tricks and graceful pole transitions, the Fly Pole allows full 360° spinning, climbing, drops, and flow choreography — in the air!

✅ Key Features:

• 3-meter length – suitable for indoor rigs, stages, or training setups
• 38 mm grip diameter – optimal for strong grip and control
• Powder-coated finish – ensures excellent grip and durability (choose from various colors)
• Fully collapsible – breaks down into 3 compact sections, easy to transport by car or even on a plane
• Lightweight yet strong – made from high-quality steel, built to handle aerial loads
• Galvanized steel hoist ring – for secure, safe rigging from a single suspension point

Weight: 12 kg

📦 Included in the package:

✔️ 3-piece powder-coated steel pole
✔️ Galvanized hoist ring
✔️ Assembly key
✔️ Ready-to-use aerial flying pole – just rig and fly!

⚠️ Rigging equipment (swivel, carabiners, span sets) not included — available separately in our shop.

💡 Who is it for?

• Aerialists seeking something different
• Pole dancers wanting to explore aerial movement
• Performers looking for dynamic show elements
• Studios expanding their equipment offering
• Travelers — perfect for tours and festivals thanks to its portable design

📐 Technical Specifications:

• Length: 3 meters
• Grip size: 38 mm
• Material: Powder-coated steel
• Hoist ring: Galvanized steel, pre-installed
• Weight capacity: Professional-grade (contact us for test results and certifications)

Choose from various colours

🌍Worldwide Shipping Available

📩 Questions? Contact us — we’re happy to help with rigging, transport tips, and choosing accessories.

🛒 Ready to take your aerial practice to new heights?
Order your Aerial Fly Pole today and feel the freedom of movement in the air!

👇👇

Add the item to your cart, and we’ll contact you by email to calculate the shipping cost and delivery time, confirm your color choice and preferences, and send you a SEPA/SWIFT invoice for payment.

The message Aerial Flying Pole – 3 m, 38 mm Grip – Powder Coated | Portable & Collapsible appeared first on Profi-Pole. Circus props & Pole Dance Shop.

Our Aerial Rubber Pole is a premium, swinging Chinese-style flying pole, designed for dynamic aerial performances, stage shows, and circus artistry. Trusted by professionals around the world, including performers from Cirque du Soleil and artists on luxury cruise ships, this pole combines safety, durability, and performance.

🔧 Technical Specifications:

• Total Height: 3.0 meters

• Sections: 3 detachable parts, 1 meter each – easy to pack and travel with

• Weight: 14 kg

• Pole Diameter: 45 mm (also available in 50 mm by request – contact us)

• Material: Steel core with vulcanized rubber coating, galvanized steel hoist ring

• Top: Equipped with a hoist ring for suspension

• Bottom: Threaded end allows installation of a custom adapter for our compatible base system (sold separately)

• Working Load Limit (WLL): 250 kg

• Breaking Load Limit (BLL): Minimum 1325 kg

✅ What’s Included:

• Aerial Rubber Pole (3 collapsible sections)

• Assembly Key

• Ready to rig and use immediately

Note: Adapter and base are sold separately.
We strongly recommend purchasing the base together with the pole, as this is a custom-made system. Adding the base later can be challenging and may require adjustments to ensure a perfect fit. When ordered together, we test and verify the full setup before shipping to ensure flawless compatibility.

🌟 Why Choose Our Rubber Pole?

• High-quality vulcanized rubber coating – This is not a wrap or tape, but a professional baked rubber covering, fused in specialized industrial ovens

• Doesn’t peel or degrade over time – our poles remain grippy and intact even after years of intense use

• Proven reliability with 10+ years of production experience and hundreds of satisfied customers worldwide

• Fully collapsible and travel-ready – fits in luggage and can be taken on planes

• Engineered with aerial artists’ needs in mind – strong, safe, and perfectly balanced

This aerial pole is ideal for studios, festivals, aerial competitions, or touring performers who need trusted circus-grade equipment.

Need a different diameter?
Standard is 45 mm, but we can make 50 mm on request.

Have questions or want to customize your setup?
Contact us – we’ll help you choose the perfect configuration.

The message Aerial RUBBER Pole – сhinese flying pole 3 m / 45 mm grip appeared first on Profi-Pole. Circus props & Pole Dance Shop.

We have developed a unique spinning pole design for installation in non-stony ground and sand. Pole is ideal for summer coaching on the beach or unforgettable photo sessions.

This pole can be used for installation on the beach, outdoors, on open air and other venues.

Characteristics:

• Pole height: working 2,8 m
• Diameter of the pole: 42,4 mm
• Operating mode: rotation and static 2 in 1
• The base of the pole is screwed into any non-stony ground for 15-20 minutes
• The kit includes everything you need to install

The message Summer pole – spinning mode appeared first on Profi-Pole. Circus props & Pole Dance Shop.

We have developed a unique pole design for installation in non-stony ground and sand. Pole is ideal for summer coaching on the beach or unforgettable photo sessions.

This pole can be used for installation on the beach, outdoors, on open air and other venues.

Characteristics:

• Pole height: working 2,8 m
• Diameter of the pole: 42,4 mm
• The base of the pole is screwed into any non-stony ground for 15-20 minutes
• The kit includes everything you need to install

The message Summer pole – static sand pole appeared first on Profi-Pole. Circus props & Pole Dance Shop.